The Eco+ 1075/12V is a 910VA / 740W pure sine wave inverter for a 2BHK home. It runs on one 12V battery and has an electronic resettable fuse.
₹7,299.00 Original price was: ₹7,299.00.₹4,999.00Current price is: ₹4,999.00.
The Eco+ 1075/12V is a 910VA / 740W pure sine wave inverter for a 2BHK home. It runs fans, LED lights, a TV, a computer and Wi-Fi from a single 12V battery, and its lithium-compatible charger means you can start with a tubular battery and move to lithium later without changing the inverter.
Overload protection here is an electronic resettable fuse rather than an MCB. If a fridge is part of your load, the Rapid+ 1500/12V (1125VA) or the Rapid+ 1700/12V (1400VA) leaves more room.
The 900 W figure is a resistive (bulb load) rating. Motors such as fridge compressors and pumps draw a short surge when they start, so count them a little heavier. Typical draws are below; check the label on your own appliances.
| Appliance | Typical running draw |
|---|---|
| Ceiling fan | 60–80 W (BLDC fan: 30–35 W) |
| LED bulb or tube | 9–20 W |
| 32 to 43 inch LED TV | 40–100 W |
| Wi-Fi router and set-top box | 10–25 W |
| Laptop and phone chargers | 45–90 W |
| Desktop PC with monitor | 150–300 W |
| Single-door refrigerator | 100–200 W, plus a start-up surge |
A working example: four fans (280 W), six LED lights (60 W), a 43-inch TV (80 W), a router (10 W) and a laptop (65 W) come to roughly 495 W, about 59% of the 840 W rating. As a rule of thumb, keep the continuous load below about 670 W, which is 80% of the rating.
It is not meant for air conditioners, geysers, induction cooktops, room heaters or irons. Those draw 1,000 W or more and need a larger inverter.
The Rapid+ 1250/12V works with one 12V battery: tubular, TGEL, SMF, gel or LiFePO4 lithium. You can start with lead-acid and move to lithium later without replacing the inverter. The inverter is sold without a battery. A 12V 150Ah tubular battery is a common pairing at this size.
To estimate backup time, multiply battery volts by amp-hours, take about half of that as usable for a lead-acid battery, multiply by 0.85 for inverter losses, and divide by your load in watts. For a 12V 150Ah tubular battery (1,800 Wh) that works out to about 1.5 hours at 495 W and about 3.1 hours at 250 W. A 12.8V 100Ah LiFePO4 battery (assuming 90% usable) gives about 2.0 hours at 495 W. These are calculations with an assumed 85% inverter efficiency, not lab measurements; heavy loads, battery age and temperature all shorten real backup.
| Model | Rated capacity | Battery voltage | Display | Suits |
|---|---|---|---|---|
| Rapid+ 1150/12V (900VA) | 900VA / 720W | 12V | LCD | 1BHK: fans, lights, TV, router, laptop |
| Rapid+ 1250/12V (this model) | 1050VA / 840W | 12V | LCD | 2BHK: fans, lights, TV, computer |
| Rapid+ 1500/12V (1125VA) | 1125VA / 900W | 12V | LCD | 2BHK with a single-door fridge |
| Rapid+ 1700/12V (1400VA) | 1400VA / 1120W | 12V | LCD | 2BHK with fridge and extra load |
The inverter carries a 3-year (36-month) warranty. Register it on the warranty registration page after installation. Shipping is free on all orders, with standard delivery in 5–7 days. If you are unsure about sizing, call 9311369797 before you order. Invertek Energy makes its UPS range at its ISO 9001:2015 certified factory in New Delhi. Other capacities are listed in the full full Rapid+ range.
| Model Series | Eco+ 1075/12V** |
|---|---|
| VA Rating | 910VA |
| Product Dimensions | 277X273X117 mm |
| Package Dimensions OD Size (mm) | 355x348x200mm |
| Item Part Number | IE-SNW-INHUPS-1075-03A |
| Number of Items | 5 |
| Wattage | 740W |
| Power Source | Inverter/ Home UPS |
| Frequencies | 50Hz |
| Manufacturer | Invertek Energy |
| Generic Name | Inverter/UPS |
| Included Components | 1 Inverter, Operating Manual, 2 DC Fuse ,Silica gel |
| Item Weight | 7.996 kg |
| Package Weight | 8.773 kg |
| Country of Origin | India |
| HSN Code | 8504 |
Q: Is 1075 the VA rating of the Eco+ 1075/12V?
No. 1075 is the model number. The Eco+ 1075/12V is rated 910VA / 740 W on a 12V battery system. When you compare it with other inverters, compare the VA, watt and battery voltage figures rather than the model number.
Q: What can the Eco+ 1075/12V run?
It suits a 2BHK home. For example, four fans (280 W), six LED lights (60 W), a 43-inch TV (80 W), a router (10 W) and a laptop (65 W) come to roughly 495 W, about 59% of the 840 W rating. Keep the continuous load under about 670 W.
Q: Can I run a computer and a fridge together?
Only if the total stays under about 670 W. A desktop PC with monitor (150–300 W), a single-door fridge (100–200 W plus a start-up surge), fans and lights get close to that. For that combination the Rapid+ 1500/12V has more headroom.
Q: Which battery should I buy for the Rapid+ 1250/12V?
One 12V battery. Tubular, TGEL, SMF, gel and 12.8V LiFePO4 batteries all work. A 150Ah tubular battery is a common choice at this size, and a larger battery gives longer backup. The inverter is sold without a battery. If you are unsure, call 9311369797 before ordering.
Q: How long will the backup last?
Backup time is usable battery watt-hours divided by your load. With a 12V 150Ah tubular battery, using about half of the battery capacity and assuming 85% inverter efficiency, expect about 1.5 hours at 495 W and about 3.1 hours at 250 W. Switching off unused loads extends this. These are estimates, not measured results.
Q: Can I use a lithium battery with the Rapid+ 1250/12V?
Yes. It is lithium compatible, so you can fit a 12.8V LiFePO4 battery now or swap one in later. At full load the inverter draws roughly 70 to 80 A from the battery, so choose a battery whose BMS is rated for at least that current.
Q: How is it different from the Rapid+ 1150/12V and Rapid+ 1500/12V?
The Rapid+ 1150/12V is rated 900VA / 720 W on 12V. This model is 1050VA / 840 W on 12V. The Rapid+ 1500/12V is 1125VA / 900 W on 12V and suits a 2BHK home that includes a single-door fridge.
Q: What happens if I overload the Rapid+ 1250/12V?
The electronic resettable fuse cuts the output when the load goes past the 840 W rating or the output is shorted. Remove the extra load and reset it; there is no fuse to replace. Keep the continuous load under about 670 W.
Q: What warranty does it have?
3 years (36 months). Register the unit on the warranty registration page after installation. For service, call 9311369797.
Get the latest updates on new products, offers, and power tips.
The Eco+ 1075/12V is a 910VA / 740W pure sine wave inverter for a 2BHK home. It runs on one 12V battery and has an electronic resettable fuse.
₹7,299.00 Original price was: ₹7,299.00.₹4,999.00Current price is: ₹4,999.00.
The Eco+ 1075/12V is a 910VA / 740W pure sine wave inverter for a 2BHK home. It runs fans, LED lights, a TV, a computer and Wi-Fi from a single 12V battery, and its lithium-compatible charger means you can start with a tubular battery and move to lithium later without changing the inverter.
Overload protection here is an electronic resettable fuse rather than an MCB. If a fridge is part of your load, the Rapid+ 1500/12V (1125VA) or the Rapid+ 1700/12V (1400VA) leaves more room.
The 900 W figure is a resistive (bulb load) rating. Motors such as fridge compressors and pumps draw a short surge when they start, so count them a little heavier. Typical draws are below; check the label on your own appliances.
| Appliance | Typical running draw |
|---|---|
| Ceiling fan | 60–80 W (BLDC fan: 30–35 W) |
| LED bulb or tube | 9–20 W |
| 32 to 43 inch LED TV | 40–100 W |
| Wi-Fi router and set-top box | 10–25 W |
| Laptop and phone chargers | 45–90 W |
| Desktop PC with monitor | 150–300 W |
| Single-door refrigerator | 100–200 W, plus a start-up surge |
A working example: four fans (280 W), six LED lights (60 W), a 43-inch TV (80 W), a router (10 W) and a laptop (65 W) come to roughly 495 W, about 59% of the 840 W rating. As a rule of thumb, keep the continuous load below about 670 W, which is 80% of the rating.
It is not meant for air conditioners, geysers, induction cooktops, room heaters or irons. Those draw 1,000 W or more and need a larger inverter.
The Rapid+ 1250/12V works with one 12V battery: tubular, TGEL, SMF, gel or LiFePO4 lithium. You can start with lead-acid and move to lithium later without replacing the inverter. The inverter is sold without a battery. A 12V 150Ah tubular battery is a common pairing at this size.
To estimate backup time, multiply battery volts by amp-hours, take about half of that as usable for a lead-acid battery, multiply by 0.85 for inverter losses, and divide by your load in watts. For a 12V 150Ah tubular battery (1,800 Wh) that works out to about 1.5 hours at 495 W and about 3.1 hours at 250 W. A 12.8V 100Ah LiFePO4 battery (assuming 90% usable) gives about 2.0 hours at 495 W. These are calculations with an assumed 85% inverter efficiency, not lab measurements; heavy loads, battery age and temperature all shorten real backup.
| Model | Rated capacity | Battery voltage | Display | Suits |
|---|---|---|---|---|
| Rapid+ 1150/12V (900VA) | 900VA / 720W | 12V | LCD | 1BHK: fans, lights, TV, router, laptop |
| Rapid+ 1250/12V (this model) | 1050VA / 840W | 12V | LCD | 2BHK: fans, lights, TV, computer |
| Rapid+ 1500/12V (1125VA) | 1125VA / 900W | 12V | LCD | 2BHK with a single-door fridge |
| Rapid+ 1700/12V (1400VA) | 1400VA / 1120W | 12V | LCD | 2BHK with fridge and extra load |
The inverter carries a 3-year (36-month) warranty. Register it on the warranty registration page after installation. Shipping is free on all orders, with standard delivery in 5–7 days. If you are unsure about sizing, call 9311369797 before you order. Invertek Energy makes its UPS range at its ISO 9001:2015 certified factory in New Delhi. Other capacities are listed in the full full Rapid+ range.
| Model Series | Eco+ 1075/12V** |
|---|---|
| VA Rating | 910VA |
| Product Dimensions | 277X273X117 mm |
| Package Dimensions OD Size (mm) | 355x348x200mm |
| Item Part Number | IE-SNW-INHUPS-1075-03A |
| Number of Items | 5 |
| Wattage | 740W |
| Power Source | Inverter/ Home UPS |
| Frequencies | 50Hz |
| Manufacturer | Invertek Energy |
| Generic Name | Inverter/UPS |
| Included Components | 1 Inverter, Operating Manual, 2 DC Fuse ,Silica gel |
| Item Weight | 7.996 kg |
| Package Weight | 8.773 kg |
| Country of Origin | India |
| HSN Code | 8504 |
Q: Is 1075 the VA rating of the Eco+ 1075/12V?
No. 1075 is the model number. The Eco+ 1075/12V is rated 910VA / 740 W on a 12V battery system. When you compare it with other inverters, compare the VA, watt and battery voltage figures rather than the model number.
Q: What can the Eco+ 1075/12V run?
It suits a 2BHK home. For example, four fans (280 W), six LED lights (60 W), a 43-inch TV (80 W), a router (10 W) and a laptop (65 W) come to roughly 495 W, about 59% of the 840 W rating. Keep the continuous load under about 670 W.
Q: Can I run a computer and a fridge together?
Only if the total stays under about 670 W. A desktop PC with monitor (150–300 W), a single-door fridge (100–200 W plus a start-up surge), fans and lights get close to that. For that combination the Rapid+ 1500/12V has more headroom.
Q: Which battery should I buy for the Rapid+ 1250/12V?
One 12V battery. Tubular, TGEL, SMF, gel and 12.8V LiFePO4 batteries all work. A 150Ah tubular battery is a common choice at this size, and a larger battery gives longer backup. The inverter is sold without a battery. If you are unsure, call 9311369797 before ordering.
Q: How long will the backup last?
Backup time is usable battery watt-hours divided by your load. With a 12V 150Ah tubular battery, using about half of the battery capacity and assuming 85% inverter efficiency, expect about 1.5 hours at 495 W and about 3.1 hours at 250 W. Switching off unused loads extends this. These are estimates, not measured results.
Q: Can I use a lithium battery with the Rapid+ 1250/12V?
Yes. It is lithium compatible, so you can fit a 12.8V LiFePO4 battery now or swap one in later. At full load the inverter draws roughly 70 to 80 A from the battery, so choose a battery whose BMS is rated for at least that current.
Q: How is it different from the Rapid+ 1150/12V and Rapid+ 1500/12V?
The Rapid+ 1150/12V is rated 900VA / 720 W on 12V. This model is 1050VA / 840 W on 12V. The Rapid+ 1500/12V is 1125VA / 900 W on 12V and suits a 2BHK home that includes a single-door fridge.
Q: What happens if I overload the Rapid+ 1250/12V?
The electronic resettable fuse cuts the output when the load goes past the 840 W rating or the output is shorted. Remove the extra load and reset it; there is no fuse to replace. Keep the continuous load under about 670 W.
Q: What warranty does it have?
3 years (36 months). Register the unit on the warranty registration page after installation. For service, call 9311369797.
Get the latest updates on new products, offers, and power tips.
Product Catalogues
Useful Links
Become a Partner
Support
Track your Order
Get In Touch
Secure Payment:

Sevenpeaks Solutions Online Ecom Distributor of Invertek Energy